EasySolar is an extremely powerful sine inverter, battery charger and automatic switch in a compact casing.
In the event of a supply failure or when the generating set is switched off, the EasySolar will switch over to inverter operation and take over the supply of connected devices. This is done so quickly that operation of computers and other electronic devices is not disturbed. You will have uninterrupted power supply. This makes the Easysolar highly suitable as an emergency power system in industrial and telecommunication applications. The maximum alternating current that can be swtiched is 16A or 50A depending on model.
Besides the usual uninterrupted output, an auxiliary output is available that disconnects its load in the event of battery operation. For example, an electric boiler that is allowed to operate only if the genset is running or shore power is available.
With this inverter, up t0 6 Multi’s can operate in parallel. Six units 24/3000/70, for example, will provide 15kw/18kva output power and 420Amps charging capacity.
We can help you configure three phase outpout with this EasySolar inverter. But that is not all, up to 6 sets of three units can be parallel connected to provide 45kw/54kVA inverter power and more than 1000A charging capacity.
This particular inverter takes the principle of “Powercontrol” to a further dimension, allowing the Easysolar to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, The EasySolar will make sure that insufficient NEPA or generator power is immediately compensated for by power from the battery. When the load reduces, you can use the spare power to recharge the battery.
EasySolar inverter has an ultra fast MPPT controller that will increase charging rate by 30% in case of a cloudy day compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Our Easysolar inverter does not need cooling fan, it has maximum efficiency that exceeds 98%. full output current up to 40c(104F).
